ESSEX Jaw Coupling

• General purpose, low cost, and flexible jaw coupling
• Flexible Rubber inserts caters to incidental Angular, Parallel, and Axial misalignments
• Comes in Standard (8 sizes), External Spider (6 sizes), and Cushion type (5 sizes)
• All versions are available in spacer type, with spacer size depending on the distance between the shaft ends (DBSE)
• Torque: 20 – 2139 Nm
• Bore Range: 15 – 90mm (via Bore)

HRC Coupling

• A product developed by Fenner (Hainsworth Research Centre, UK)
• Higher power transmission & misalignment capacity
• Available in Taper Lock / Through Bore versions
• Optimized design to balance power capacities
• Appropriate shaft diameters that utilize Taper Lock Bush fixing.
• Nitrile Rubber elastomeric inserts to withstand temperatures from – 40°C to +100°C
• Comes in 8 varying sizes (HRC-70 to HRC-280)
• Torque:5 – 3150 Nm
• Bore: 9 – 90mm (Taper Lock) & 10 – 115mm (Through Bore)

Pin Bush Coupling

• Simple and Compact
• High Torque and High Speed
• Flanges in pilot or finished bore
• Lubrication is not required
• Comes in 26 sizes (FBC-1 TO FBC-17)
• Power rating ranges from 0.81 kW to 2069kW at 100 rpm.
• Torque Range: 77 – 1,97,600 Nm
• Torque:5 – 3150 Nm
• Bore range:7 – 350mm

Fenaflex Tyre Coupling

• Highly Elastic and Back Lash Free
• Absorbs shocks and dampens vibrations
• High Misalignment Capacity
• Available with Taper Lock Bushes
• Available with Spacers 100mm,140mm,180mm DBSE
• Choice of tyres – Standard, Neoprene, or Fire Resistant Anti-Static (FRAS)
• Inherent Overload Protection
• Lubrication is not required
• Comes in 17 sizes (F40 – F250)
• Power rating ranges from 0.22 kW to 132kW at 100 rpm
• Bore: 9 – 127mm (Taper Lock) & 11 –190mm (Through Bore)

Gear Coupling

• High Mechanical Flexibility – Crowned Tooth profile
• High Mechanical Flexibility – Curved Tooth profile
• High compensation of Angular, Parallel, and Axial misalignment
• High power carrying capacity
• Suits variety of applications
• Conforming to IS & IPSS Standards
• Seal carrier for easy maintenance
• Carbon Steel forged / cast hubs with hardened teeth
• Comes in 19 sizes (FGC-1 – FGC-19)
• Comes with Torsion shaft.
• Torque: 1100 – 14,70,000 Nm
• Bore range: 14 – 710 mm

Resilient Coupling

• High-power rating and greater flexibility
• Ranges from 0.45kW to 1308kW at 100 RPM
• Vertical & Horizontal Split cover for easy installation